|
Programming the Roland TB-303
| start | | | Sequencer: | workflow - pattern play - pattern write - track play - track write - quick results | | | Sound | | |
pattern play
when the 303 is slaved to a master (eg the TR-606), the RUN/STOP key is disabled on the 303. please use the RUN/STOP key on the master.
 |
PATTERN PLAY |
 STOP |
pattern | - | select | : | [1..8], A or B | ||
| - | chain | : | [1..4] or [5..8] | ||||
| - | shift info | : | hold "PITCH MODE" | ||||
| - | shift | : | hold "PITCH MODE" + [C..C' ] | ||||
| general | - | tune | : | hold "TAP" for sustained pitch | |||
RUN |
pattern | - | select | : | [1..8], A or B | ||
| - | chain | : | [1..4] or [5..8] | ||||
| - | shift info | : | hold "PITCH MODE" | ||||
| - | shift | : | hold "PITCH MODE" + [C..C' ] | ||||
| - | mangle | press TAP | tuning pitch will sound after RUN/STOP is pressed yes that is useless ;) |