|
start - tips - pictures - signal flow - presets - repair dead keys | apps: patch editor - sysx analyzer | midi: sysx structure - cc messages - BCF2000
Panel layout BCF2000 for the DK70
The color coding shows the different settings groups.
Don't forget to also set the DK70 to "MIDI EXT." first (button next to the VOLUME rotary).
See Setup document for the correct MODE of the BCF2000.
Download SysX BCF2000 - Siel DK70.
Send all BCF Controller settings
- as SysX message (to PC): first SAVE the preset (press STORE twice). hold EDIT and press PRESET >
- as CC messages (to SIEL): hold EDIT and press < PRESET
| DCO A + B | NOISE | => | AMP DCO | AMP NOISE | => | VCF | => | CHORUS | => | VOLUME | |||
| (LFO-1) | DETUNE B | (ENV-A) | (ENV-B) | (ENV-VCF) | (ENV-VCF) | (LFO-2) | |||||||
| BCF2000 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ||||||||
| Rotary: | ||||||||||||||||
| Group 1 | 64 53 |
DCO Square 16' Level [0 ~ 15] |
65 54 |
DCO Square 8' Level [0 ~ 15] |
66 55 |
DCO Square 4' Level [0 ~ 15] |
67 56 |
DCO Square 2' Level [0 ~ 15] |
51 46 |
LFO-1 Frequency [0 ~ 15] |
54 49 |
LFO-1 Delay Time [0 ~ 15] |
53 48 |
LFO-1 Initial Level [0 ~ 15] |
52 47 |
LFO-1 Final Level [0 ~ 15] |
| + Push 1 | ||||||||||||||||
| Group 2 | 01 12 |
DEG VCA-A Attack [0 ~ 15] |
02 13 |
DEG VCA-A Decay [0 ~ 15] |
03 14 |
DEG VCA-A Breakpoint [0 ~ 15] |
04 15 |
DEG VCA-A Slope [0 ~ 15] |
05 16 |
DEG VCA-A Sustain [0 ~ 15] |
06 17 |
DEG VCA-A Release [0 ~ 15] |
-- | -- | ||
| + Push 2 | ||||||||||||||||
| Group 3 | 11 21 |
DEG VCA-B Attack [0 ~ 15] |
12 22 |
DEG VCA-B Decay [0 ~ 15] |
13 23 |
DEG VCA-B Breakpoint [0 ~ 15] |
14 24 |
DEG VCA-B Slope [0 ~ 15] |
15 25 |
DEG VCA-B Sustain [0 ~ 15] |
16 26 |
DEG VCA-B Release [0 ~ 15] |
43 42 |
LFO-2 Initial Level [0 ~ 15] |
42 41 |
LFO-2 Final Level [0 ~ 15] |
| + Push 3 | ||||||||||||||||
| Group 4 | 31 33 |
DEG VCF Attack [0 ~ 15] |
32 4 |
DEG VCF Decay [0 ~ 15] |
33 35 |
DEG VCF Breakpoint [0 ~ 15] |
34 36 |
DEG VCF Slope [0 ~ 15] |
35 37 |
DEG VCF Sustain [0 ~ 15] |
36 38 |
DEG VCF Release [0 ~ 15] |
41 40 |
LFO-2 Frequency [0 ~ 15] |
44 43 |
LFO-2 Delay Time [0 ~ 15] |
| + Push 4 | ||||||||||||||||
| Button 1 | 08 20 |
DCO Mode 1 (Whole) ~ 2 (Double) |
62 51 |
DCO Waveform * 0 (Off), 1 (Sqr), 2 (Saw) |
63 52 |
DCO Sawtooth Octave * 1 (16'), 2 (8'), 3 (4') |
24 32 |
Noise Destination 1 (VCA) ~ 2 (VCF) |
55 50 |
LFO-1 Delay Mode 1 (Manual), 2 (Auto) |
45 44 |
LFO-2 Delay Mode 1 (Manual), 2 (Auto) |
46 45 |
LFO-2 Waveform 1 (Triangle), 2 (Square) |
81 62 |
Chorus ** 0 (Off), 1 (On) |
| Button 2 | -- | 74 60 |
VCF DEG Trigger Mode 1 (Single), 2 (Multi) |
73 59 |
VCF Keyboard Track * 0 (Off), 1 (Half), 2 (Full) |
-- | 07 19 |
DEG VCA-A Damper 0 (Off) ~ 1 (On) |
-- | 17 28 |
DEG VCA-B Damper 0 (Off) ~ 1 (On) |
-- | ||||
| Fader | 71 57 |
VCF Cutoff [0 ~ 99] |
72 58 |
VCF Resonance [0 ~ 15] |
75 61 |
VCF DEG Level [0 ~ 15] |
21 29 |
Detune Interval [0 ~ 61] |
22 30 |
Detune Fine ** [0 ~ 15] |
23 31 |
Noise Level [0 ~ 15] |
-- | 82 63 |
Volume [0 ~ 15] |
|
| Explanation | |||
| 64 53 |
DCO Square 16' Level [0 ~ 15] |
|
|
* [51, 52, 59] multi value button, choose "INC" on the BCF
** [CC30, CC62] (Detune Fine and Chorus on/off) The display changes, but you do not hear the change until you press the VALUE button on the DK70.
Programming the BCF2000
Unfortunately, I ran out of consequent rotary's for LFO-2, so this modulator is a bit off the logic.
The BFC2000 is not that hard to program and actually a lot of fun to do. Dump the settings to the computer after finished.